Connecting To A Computer - Sanyo plc-wxl46a Owner's Manual

Installation

Connecting to a Computer

Cables used for connection
• VGA Cables (Mini D-sub 15 pin)*
• Audio Cables (Mini Plug: stereo)
(*One cable is supplied; other cables are not supplied with the projector.)
Audio Output
Audio cable
(stereo)
COMPUTER IN 1/
COMPONENT IN
Note:
•Input sound to the COMPUTER/COMPONENT AUDIO IN
terminal when using the COMPUTER IN 1/COMPONENT
IN and the COMPUTER IN 2/MONITOR OUT terminal as
input.
•When the AUDIO OUT is plugged-in, the projector's
built-in speaker is not available.
•When the cable is of the longer variety, it is advisable to
use the COMPUTER IN 1/COMPONENT IN and not the
COMPUTER IN 2 /MONITOR OUT.
14
Monitor Output
VGA cable
SERVICE PORT
COMPUTER/
COMPONENT
AUDIO IN
Monitor Output
or
Monitor Input
VGA cable
COMPUTER IN 2/
MONITOR OUT
This terminal is switchable. Set up the
terminal as either Computer input or
Monitor output (see page 44).
(VARIABLE)
AUDIO OUT
R R
COMPUTERIN 2 /
MONIT OR OUT
COMPUTER /
L L
VIDEO IN
VIDEO IN
COMPONENT
(MONO) (MONO )
S-VIDEO IN S-VIDEOIN
AUDIO IN AUDIO IN
External Audio Equipment
Audio Input
Audio cable
(stereo)
AUDIO OUT
(stereo)
Unplug the power cords of
both the projector and external
equipment from the AC outlet
before connecting the cables.