Table of Contents
Advertisement
Computer Input
Manual PC Adjustment
Some computers employ special signal formats which may not be tuned by Multi-scan system of this projector.
Manual PC Adjustment enables you to precisely adjust several parameters to match those signal formats. The
projector has five independent memory areas (Mode 1–5) to store those parameters manually adjusted, which
allows you to recall the setting for a specific computer.
1
Press the MENU button to display the On-Screen
frame pointer to the PC Adjust Menu icon.
2
pointer to the desired item and then press the SELECT
button to display the adjustment dialog box. Press the
Fine sync
flicker from the image displayed (from 0 to 31).
Total dots
in one horizontal period to match your PC image.
Horizontal
position.
Vertical
position.
Current mode
Press the SELECT button to show H-sync freq. and V-sync
freq. of the connected computer.
Clamp
the image has dark bars, try this adjustment.
28
PC Adjust Menu icon
PC Adjust Menu
Move the red frame pointer
to the desired item and
press the SELECT button.
Status (Stored/Free) of the
selected Mode.
Selected Mode
Use the Point
to adjust the value.
Press the SELECT button
here to move on to other
items.
Press the SELECT button
at "Current mode" to
show the information of
the connected computer.
buttons
Advertisement
Chapters
Table of Contents
