Sanyo plc-wxl46a Owner's Manual page 43

Logo PIN code lock
This function prevents an unauthorized person from
changing the screen logo.
Off...... the screen logo can be changed freely from
the Logo select menu (p.42).
On...... the screen logo cannot be changed without
the Logo PIN code.
If you want to change the Logo PIN code lock setting,
enter a Logo PIN code along the following steps. The
initial Logo PIN code is set "4321" at the factory.
Enter a Logo PIN code
and move the pointer. The number changes to " ". If
you fixed an incorrect number, move the pointer to the
button, and then select the correct number by pressing
Repeat this step to complete entering a four-digit
number.
After entering the four-digit number, move the pointer to
button so that you can change the following Logo PIN
code lock settings.
If you entered an incorrect PIN code, "Logo PIN code"
and the number ( ) turns red. Enter a correct
Logo PIN code all over again.
Change the Logo PIN code
Logo PIN code can be changed to your desired four-digit
number. Select "Logo PIN code change" with the Point
PIN code.
Be sure to note the new Logo PIN code and keep it on
hand. If you lost the number, you could no longer change
the Logo PIN code setting. For details on PIN code
setting, refer to relevant instructions of the PIN code lock
function on pages 47–48.
CAUTION:
WHEN YOU HAVE CHANGED THE LOGO PIN CODE,
WRITE DOWN THE NEW PIN CODE IN COLUMN OF
THE LOGO PIN CODE NO. MEMO ON PAGE 68, AND
KEEP IT SECURELY. SHOULD THE LOGO PIN CODE
BE LOST OR FORGOTTEN, THE LOGO PIN CODE
SETTING CAN NO LONGER BE CHANGED.
Logo PIN code lock
Logo PIN code lock Dialog Box
After a correct Logo PIN code is entered, the
following dialog box appears.
or change the Logo PIN code.
Select Logo PIN code change by pressing the
Setting
43