Speaker Connections - Sony XM-GS4 Operating Instructions Manual

 High level input connection
With the speaker connection , ,  or 
(page 7, 8)
Gray 
Front right speaker
output
Gray/Striped 
White 
Front left speaker
output
White/Striped 
Rear right speaker
output
Rear left speaker
output

High Level Input Connector
Note
Also, refer to the manual supplied with your car audio
unit for further details.
Purple 
Purple/Striped 
Green 
Green/Striped 

Speaker Connections

Set the FILTER selector switch on the control panel
to "HP" (high-pass filter), "LP" (low-pass filter) or
"OFF" according to the speaker system.
Also, refer to the manual supplied with your
speakers for further details.
Recommended high-resolution audio
system
XM-GS4
(this unit)
Hi-Res Audio
supported car audio unit
(e.g. RSX-GS9)
Power amplifier
(e.g. XM-GS100)
Note
Certain products shown in the diagram may not be
available in your country or region.
 6-speaker system (recommended for
the high-resolution audio system)
With the input connection  or  (page 6, 7)
Front super tweeter (min. 4 Ω)
Crossover network
Front speaker (min. 4 Ω)
Rear speaker (min. 2 Ω)
Super tweeter
(e.g. XS-GS1)
Full-range speaker
(e.g. XS-GS1621)
Subwoofer
(e.g. XS-GSW121D)
7
GB