Operation; Reading The Temperature - Clas Ohlson WS2015H User Manual

4. Operation

4.1 Reading the temperature
Displaying the indoor temperature:
1. When you have inserted the batteries the temperature
will appear on the display.
Displaying the outdoor temperature
1. Press [Channel] repeatedly to switch channels
between 1, 2, 3 and 4 (if you have more than one
transmitter/sensor). The temperature is shown on
the display.
2. Press and hold in [Alarm/C/F] for 3 seconds to
activate or deactivate automatic switching between
the different channels (applies if you have more than
one transmitter/sensor).
Switching between Celsius and Fahrenheit
1. Switch between Celsius and Fahrenheit by pressing
[Alarm/C/F] when the receiver is in clock mode.
Displaying the max and min temperature
• Press [Minute/-/Min] in the clock mode to see
the minimum temperature.
• Press [Hour/+/Max] in the clock mode to see
the maximum temperature.
Deleting the max and min temperature
Note: The max/min values must be deleted manually if
you wish to change the measuring period.
Select the display of the value to be deleted. Press and
hold in [Minute/-/Min] or [Hour/+/Max] for 3 seconds
until a signal is heard and the stored temperature value
is deleted.
Indication that the temperature is outside the measuring range
"Hi" and "Lo" appear on the display when the values are above or below the normal values.
Indoor/outdoor Temperature
Indoor > +55 ºC
Indoor < -20 ºC
Outdoor > +70 ºC
Outdoor < -30 ºC
Humidity Display
> 95 % Hi
< 15 % Lo
> 95 % Hi
< 15 % Lo
8
MAX
MAX
MIN
MIN
MAX
MAX
MIN
MIN