Thermometer
Art.no 36-3317
Model RS3010
Please read the entire instruction manual before use
and save it for future reference. We reserve the right
for any errors in text or images and for making any
necessary technical changes to this document.
If you should have any questions concerning technical
problems please contact our Customer Services.
Safety
Remove the batteries if the product is not to be used
for a longer period of time. The batteries can begin to
leak and damage the device.
Product Description
•
Clock and simultaneous display of inner and
outer temperature.
•
Selectable temperature display (Celsius or Fahrenheit).
•
Date and selectable time zone display.
•
Memory of highest and lowest read temperatures.
•
Operates on two LR03/AAA batteries (not included).
Inserting the batteries
•
Remove the battery cover and insert 2 × LR03/
AAA-batteries. Make sure that the plus and minus
poles correspond to the markings in the battery
compartment.
•
Replace the battery cover.
Operating Instructions
Display
For normal temperature display, press MODE to
choose between time or date display. The display
returns to displaying the time after 30 sec. if no button
is pressed during this time.
Settings
1.
For normal temperature display, press and hold
the MODE button for 2 seconds in order to come
to the settings mode (the upper row begins to
flash). Press MODE in order to shuffle between
the different settings in the following order:
-
Time zone
-
12/24 hour display.
-
Time
-
Date
-
Temperature scale (°C/°F)
GREAT BRITAIN • CUSTOMER SERVICE
tel: 020 8247 9300 internet: www.clasohlson.co.uk
e-mail customerservice@clasohlson.co.uk
2.
Press the MIN/MAX button to change
the current settings.
3.
Press MODE to confirm and to continue.
4.
Repeat steps 2 and 3 to continue with
the settings or press MODE repeatedly to exit
the settings mode.
MIN/MAX
1.
For normal temperature display, press MIN/MAX
once to display the lowest measured temperature.
"MIN" is shown on the display.
2.
Press the MIN/MAX button again to display
the highest measured temperature. "MAX" is
shown on the display.
3.
Press the MIN/MAX a third time to return to
normal mode.
Resetting the MIN/MAX values
1.
Press MIN/MAX to display the lowest measured
temperature. "MIN" will be displayed.
2.
Press and hold the MIN/MAX button for approx.
2 seconds to reset the MIN temperature.
3.
Press MIN/MAX to display the highest measured
temperature. "MAX" will be displayed.
4.
Press and hold the MIN/MAX button for approx.
2 seconds to reset the MAX temperature.
NB!
The Min.- and Max. -temperatures are reset every
night at midnight (00:00).
Care and Maintenance
Use a soft damp cloth to clean the product.
Never use solvents or strong detergents.
Disposal
Follow local ordinances when disposing of this
product. If you are unsure about how to dispose
of this product contact your municipality.
Specifications
Measurement Range 0 to +50 °C (indoors)
−50 to +70 °C (outdoors)
Accuracy
+/− 1,0 °C
Operating Voltage
2 × LR03/AAA batteries
(not included)
Lead length,
outdoor sensor
2.5 m
120 × 70 × 20 mm
Dimensions