Troubleshooting Guide; Recycling - Clas Ohlson WS2015H User Manual

5. Troubleshooting guide
Problem
The temperature
on the transmitter's
display is not the same
as the outdoor
temperature displayed
on the receiver.
The temperature on
the transmitter seems
to be too high.
The receiver cannot
receive signals and
display them.
The functions are
behaving abnormally
or not working at all.

6. Recycling

Follow local ordinances when disposing of this product.
If you are unsure how to proceed, contact your local authority.
Solution
Wait 1–2 minutes to make sure that the transmitter and
receiver are in sync. If not, synchronise the units again
by holding in [Channel] for three seconds until a signal
is heard.
Make sure that the transmitter is not placed in direct
sunlight or next to a heat source.
• Synchronise the units again.
• The temperature might be below -30 ºC.
• The sensor's batteries need replacing.
• Move the receiver and the sensor closer to each other.
• Make sure that the sensor is placed away from
electrical interference.
• The range of the units is affected by their position in
relation to various obstacles or walls. Experiment until
you find the best position.
The instrument needs to be reset. Do this by replacing
the batteries in both the sensor and receiver.
12