Setup; Setting The Time, Date And Language - Clas Ohlson WS2015H User Manual

3. Setup

3.1 Setting the time, date and language
Setting the clock
1. Hold [Mode/Snooze] for three seconds until a signal is heard and you come to
the settings mode. The digits of the clock display will flash.
2. Press [Hour/+/Max] to set the hours and press [Minute/-/Min] to set the minutes.
3. While setting the clock, press [Alarm/C/F] to switch between 12 and 24 hour
clock. In 12-hour display mode, AM or PM is also shown on the display.
Setting the date
1. If you are not already in the time and date settings mode, press and hold in
[Mode/Snooze] for three seconds until a signal is heard and you come to
the settings mode. Press [Mode/Snooze] once again until the date display
begins to flash.
2. Press [Hour/+/Max] to set the month and press [Minute/-/Min] to set the day.
Press [Channel] to set the day of the week.
Press [C/F] if you want to leave the settings mode.
Setting the language
1. Press and hold [Mode/Snooze] for three seconds until a signal is heard and you
come to the settings mode. Press [Mode/Snooze] again until the letter representing
a language (D for German, E for English, F for French or I for Italian) flashes.
2. Then set the language using [Hour/+/Max] and [Minute/-/Min].
Press [C/F] if you want to leave the settings mode.
Setting time zone 2 (to display the time in another time zone)
1. If you are not already in the time and date settings mode, press and hold in
[Mode/Snooze] for three seconds until a signal is heard and you come to
the settings mode. Press repeatedly on [Mode/Snooze] until "ZONE 0 0" begins
to flash.
2. Then select the desired time zone (-1 to -12/+1 to +12) using [Hour/+/Max] and
[Minute/-/Min].
6