Changing Background Logo - NEC WT615 User Manual

Changing Background Logo

You can change the default background logo using the Viewer feature.
NOTE: File size must be 256KB or less. File formats other than JPEG, BMP, non-interlaced GIF or non-interlaced PNG are not
available.
Preparation:
Use the Capture feature to store JPEG or BMP files in a PC card inserted into the projector's slot or USB memory*
into projector's USB port. Or store JPEG, BMP, non-interlaced GIF or non-interlaced PNG files in a PC card or
USB memory inserted into your PC's slot or USB port and insert the PC card into the projector's slot or USB
memory into the projector's USB port.
*NOTE: USB memory devices are not available for the Capture function on the WT610.
1. Press the VIEWER button on the remote control to display an image.
2. Press the MENU button to display the Viewer menu.
3. Use the SELECT
The Thumbnail screen will be displayed.
Slot 1
3 Files
_CAP_
_RESTORE
RECYCLED
1/3 0000.jpg 60KB
select : ENTER
NOTE: To change highlight from the Thumbnails screen (pane on the right) to a directory tree (pane on the left) , press the EXIT
button. To return highlight to the Thumbnails screen, press the ENTER button.
4. Use SELECT
5. Press the MENU button to display the Viewer menu.
6. Use the SELECT
A confirmation dialog box will be displayed.
7. Use the SELECT
for the background.
* Once you have changed the background from the NEC logo to another, you cannot return the logo to back-
ground even by using "Reset". To put the NEC logo back in the background logo, repeat the above steps. The
NEC logo file is included on the supplied User Supportware 2 CD-ROM (/Logo/nec_b_x.jpg).
button to select "Thumbnails" and then press the ENTER button.
0000.jpg 0001.jpg 0002.jpg
folder : EXIT
or button to select a file (slide) for your background logo.
button to select "Logo" and then press the ENTER button.
button to select "Yes" and press the ENTER button. This completes changing a logo
?
79
5. Using the Viewer