Changing The Logo Data (Background Image) - NEC P605UL User Manual

6-6. Changing the logo data (background image)

• You can change the screen of the input terminal in a signal-less state (background logo) or the
background image of the MultiPresenter start-up screen (MultiPresenter logo).
• You can also set a password to prohibit third parties from changing the pictures.
• You can set pictures that satisfy all of the following conditions.
Format
Resolution
File size
1. Display the file list screen.
2. Move the cursor to the picture to set
in the background logo or the Multi-
Presenter logo and press the MENU
button.
The pop-up menu will be displayed.
3. Move the cursor to [LOGO] and press
the ENTER button.
The sub-menu will be displayed.
① Setting the background logo or MultiPresenter logo
1. Move the cursor to [SET TO BACKGROUND LOGO] or [SET TO MultiPresenter LOGO] in the
sub-menu and press the ENTER button.
• If a [LOGO PASSWORD] has been set, enter the [LOGO PASSWORD] when the [LOGO PASS-
WORD] input screen appears.
• A screen to confirm whether to change the logo or not is displayed.
2. Move the cursor to [YES] and press the ENTER button.
② Initializing the background logo or MultiPresenter logo
1. Move the cursor to [RESET BACKGROUND LOGO] or [RESET MultiPresenter LOGO] and
press the ENTER button.
• If a [LOGO PASSWORD] has been set, enter the [LOGO PASSWORD] when the [LOGO PASS-
WORD] input screen appears.
• A screen to confirm whether to initialize the logo or not is displayed.
2. Move the cursor to [YES] and press the ENTER button.
JPEG or PNG pictures that can be displayed with the [VIEWER]
Below the panel resolution of the projector
P605UL/P525UL: WUXGA (1920 × 1200)
P525WL: WXGA (1280 × 800)
1 megabyte or less
109
6. Using the VIEWER