NEC WT615 User Manual page 115

The Security function takes effect.
To register a PC card as a protect key.
1. Insert a PC card into the PC card slot of the projector.
2. Use the SELECT
3. Use the SELECT
Data of the PC card will be read into the projector.
4. Use the SELECT
Downloaded data will be registered and be displayed in the list window.
5. Use the SELECT
NOTE: To use a PC card as a protect key, you must also set up a keyword. Please make a note of your keyword.
This completes registration of your PC card.
To enable Security, use the SELECT
"OK" and "Security function will be enabled. An "Are you sure?" message will appear. Use the SELECT
and press the ENTER button.
The Security function takes effect.
To turn on the projector when Security is enabled (when using your keyword only).
1. Press and hold the POWER button for a minimum of two seconds.
The projector will be turned on and display a message to the effect that the projector is security-pro-
tected.
2. Press the MENU button.
The Release Code input screen will be displayed.
3. Enter your keyword in the Release Code input screen.
You can view the projected image.
NOTE: Do not forget your keyword. However, if you forget your keyword, NEC or your dealer will provide you with your Release
Code. See more information at the end of this section.
or button to select "Use Protect Key" and press the ENTER button.
or button to select "Read" and press the ENTER button.
or button to select "Register" and press the ENTER button.
or button to select "Keyword" and use the software keyboard to enter a keyword.
or button to select "Enable" and use the SELECT
108
6. Using On-Screen Menu
or button to select
or button