NEC WT615 User Manual page 33

(B) Example of wireless LAN connection
(Network Type → Mode: Infrastructure)
Wireless LAN card (optional)
To make connection with a wired LAN via an access point, you need to select the Infrastructure mode.
From the menu, select [Setup] → [Installation] → [LAN Mode] → "Profile" → "Advanced" → "Network Type" →"Mode"
→ "Infrastructure".
(C) Example of wireless LAN connection (Network Type → Mode: 802.11 Ad Hoc)
Wireless LAN card (optional)
Wireless LAN card
To enable direct communication (i.e., peer-to-peer) between personal computers and projectors, you need to
select the 802.11 Ad Hoc mode.
From the menu, select [Setup] → [Installation] → [LAN Mode] → "Profile" → "Advanced" → "Network Type" →
"Mode" → "802.11 Ad Hoc".
The 802.11 Ad hoc mode complies with IEEE802.11 standard.
When in Ad Hoc mode, only 802.11b is available for communication method.
Data transmission speed in Ad Hoc mode is limited up to 11Mbps.
Wireless LAN card
Access Point
Wired LAN
2. Installation and Connections
Built-in wireless LAN function
Built-in wireless LAN function
26