Part Names Of The Remote Control - NEC WT615 User Manual

Part Names of the Remote Control

1
OFF
5
MAGNIFY
6
10
11
12
VIDEO
ASPECT
PIC-MUTE
VOLUME
FREEZE
1. Infrared Transmitter/Laser Pointer
Transmits an infrared signal when any button other
than LASER is pressed.
Direct the remote control toward the remote sensor
on the projector cabinet.
Beams a laser light when the Laser button is pressed.
CAUTION:
* Do not look into the laser pointer while it is on.
* Do not point the laser beam at a person.
2. Remote Jack
Connect your remote control cable here for wired op-
eration.
3. LED
Flashes when any button is pressed.
4. POWER ON Button
When the main power is on, you can use this button
to turn your projector on.
NOTE: To turn on the projector, press and hold the
POWER ON button for a minimum of two seconds.
5. POWER OFF Button
You can use this button to turn your projector off.
NOTE: To turn off the projector, press the POWER OFF
button twice.
2
3
4
ON
POWER
7
LASER
PAGE
UP
9
POINTER
DOWN
8
13
14
COMPUTER VIEWER
AUTO ADJ. SLIDE
HELP
FOCUS ZOOM
3D REFORM
6. MAGNIFY (+) (–) Buttons
Use these buttons to adjust the image size.
The image can be magnified about the center of the
screen up to 400%. See page 52.
7. LASER Button
Press and hold this button to activate the laser pointer.
When lit, you can use the laser to draw your audience's
attention to a red dot that you can place on any ob-
ject. See page 44.
8. POINTER Button
Press this button to display the projector pointer. You
can move your pointer icon to the area you want on
the screen using the SELECT
page 51.
9. PAGE (UP) (DOWN) Buttons
Use these buttons to scroll the viewing area of the
window or to move to the previous or next slide in
PowerPoint on your computer when the supplied USB
cable is connected with your computer.
10. MENU Button
Displays the menu for various settings and adjust-
ments.
11. SELECT
This button is used for projector's menu operation and
moving the magnified image.
This button also works as a computer mouse when
the supplied USB cable is connected with your com-
puter.
12. ENTER Button
Executes your menu selection and activates items
selected from the menu.
13. EXIT Button
Returns to the previous menu.
While you are in the main menu, pressing this button
will close the menu.
14. R-CLICK Button
Works as the mouse right button when the supplied
USB cable is connected with your computer.
10
1. Introduction
or
Button
button. See