Technical Data - Hilti ST 1800 Operating Instructions Manual

4. Technical data

Tool
Rated power
Rated voltage
Rated current
Mains frequency
Weight as per EPTA-Procedure 01/2003
Dimensions (L×W×H)
Chuck
Speed under no load
Max. torque
Speed control
Torque adjustment
Forward / reverse
Double insulation (as per EN 60745)
Mechanical clutch
Vibration-absorbing grip
-NOTE-
The vibration emission level given in this information sheet has been measured in accordance with a standardised
test given in EN 60745 and may be used to compare one tool with another. It may be used for a preliminary assess-
ment of exposure. The declared vibration emission level represents the main applications of the tool. However if
the tool is used for different applications, with different accessories or poorly maintained, the vibration emission
may differ. This may significantly increase the exposure level over the total working period. An estimation of the
level of exposure to vibration should also take into account the times when the tool is switched off or when it is
running but not actually doing the job. This may significantly reduce the exposure level over the total working
period. Identify additional safety measures to protect the operator from the effects of vibration such as: maintain
the tool and the accessories, keep the hands warm, organisation of work patterns.
Noise and vibration information (measured in accordance with EN 60745):
Typical A-weighted sound power level (L
Typical A-weighted sound pressure level (L
For the given sound power level as per EN 60745, the tolerance is 3 dB.
It is recommended that ear protection is worn.
Triaxial vibration value (vibration vector sum)
measured in accordance with EN 60745-2-2
Screwdriving without impact, (a
Uncertainty (K) for triaxial vibration value :
Right of technical changes reserved!
Printed: 08.07.2013 | Doc-Nr: PUB / 5070705 / 000 / 01
):
wA
):
pA
):
h
ST1800
600 W (WH version (120 V) 670 W)
100 V, 110–120 V, 220–240 V
2.8 A at 230 V ( 6.1 A at 120 V)
50 / 60 Hz
1.9 kg
308×72×265 mm
" hexagon socket
1 /
4
0–1900 r.p.m.
22 Nm
Electronic, by way of control switch
In 18 increments / 1.5–22 Nm
Pushbutton
Protection class II Z
95 dB (A)
84 dB (A)
< 2.5 m/s 2
1.5 m/s 2
en
11