Make a note of this data in your operating instructions 3. Tools and accessories and always refer to it when making an enquiry to your 4. Technical data Hilti representative or service department. 5. Safety precautions 6. Before use 7. Operation...
2. Description The above settings are intended as an approximate guide- 2.1 Use of the tool as directed line. They result from evaluation of the characteristic The ST 1800 is a hand-held, electric mains-powered tool curves for the torque clutches of tools tested in quality for driving screws used to fasten sheet metal in metal assurance tests and from torque values obtained from construction applications.
4. Technical data Tool ST1800 Rated power 600 W (WH version (120 V) 670 W) Rated voltage 100 V, 110–120 V, 220–240 V Rated current 2.8 A at 230 V ( 6.1 A at 120 V) Mains frequency 50 / 60 Hz Weight of tool 1.8 kg...
Page 6
When not in use, the tool must be stored in a dry place, Damaged switches must be replaced at a Hilti service locked up or out of reach of children. center. Do not use the tool if it cannot be switched off Avoid unintentional starting.
5.5 Personal protective equipment The operator and other persons in the immediate vicinity must always wear eye protection and ear protection while the tool is in use. Wear eye Wear ear protection protection 6. Before use 3. Pull the protective sleeve off toward the front end of the tool.
If necessary, your with an oil-soaked rag. electric tool should be repaired at a Hilti repair center. Repairs to the electrical section of the tool may be car- 8.2 Care of the electric tool...
9. Disposal Most of the materials from which Hilti electric tools are manufactured can be recycled. The materials must be correctly separated before they can be recycled. In many countries, Hilti has already made arrangements for taking back your old electric tools for recycling. Please ask your Hilti customer service department or Hilti representa- tive for further information.
11. EC declaration of conformity Designation: Electric screwdriver Type: ST1800 Year of design: 2003 We declare, on our sole responsibility, that this product complies with the following directives and standards: 73/23/EWG, 98/37/EG, 89/336/EWG, EN 50144-1, EN 50144-2-2, EN 55014-1, EN 55014-2, EN 61000-3-2, EN 61000-3-3.