Windows 2000/Nt/Xp - ZyXEL Communications ZyAIR b-2000 Quick Installation Manual

Your computer must have a network card and TCP/IP installed. TCP/IP should already be installed on
computers using Windows NT/2000/XP, Macintosh OS 7 and later operating systems. Refer to the Setting
Up Your Computer's IP Address appendix in the User's Guide for configuring the IP address in other
operating systems.

3.1 Windows 2000/NT/XP

1. In Windows XP, click start, Control Panel. In Windows 2000/NT, click Start, Settings, Control
Panel.
2. In Windows XP, click Network Connections.
In Windows 2000/NT, click Network and Dial-up Connections.
Right-click Local Area Connection and then click Properties.
3.
4. Select Internet Protocol (TCP/IP) (under the General tab in Win XP) and click Properties.
5. The Internet Protocol TCP/IP Properties screen
opens (the General tab in Windows XP).
-To have your computer accept a dynamic IP address,
click Obtain an IP address automatically.
-If you want a static IP address, click Use the
following IP Address and fill in the IP address (use
one between192.168.1.2 and 192.168.1.254), Subnet
mask (255.255.255.0), and Default gateway
(192.168.1.1) fields.
Click Advanced.
6. Remove any previously installed gateways in the IP
Settings tab and click OK to go back to the Internet
Protocol TCP/IP Properties screen.
ZyAIR B-2000 v. Broadband Wireless Sharing Router
2
8