Advertisement
Verifying TCP/IP Properties
1. Click Start and then Run. In the Run window, type "winipcfg" and then click OK
to open the IP Configuration window.
2. Select your network adapter. You should see your computer's IP address, subnet
mask and default gateway.
Setting up Your Windows NT/2000/XP Computer
Configuring TCP/IP
1. Click Start, Settings, Network and Dial-up Connections and right-click Local
Area Connection or the connection you want to configure and click Properties.
For Windows XP, click start, Control Panel, Network and Internet Connections
and then Network Connections. Right-click the network connection you want to
configure and then click Properties.
2. Select Internet Protocol (TCP/IP) (under the General tab in Win XP) and click
Properties.
3. The Internet Protocol TCP/IP Properties window opens. Click Obtain an IP
address automatically.
4. Click Obtain DNS server automatically.
5. Click Advanced, IP Settings tab and remove any installed gateways, then click
OK.
6. Click OK to save and close the Internet Protocol (TCP/IP) Properties window.
7. Click OK to close the Local Area Connection Properties window.
8. Turn on your P964 APR and restart your computer (if prompted).
Verifying TCP/IP Properties
1. Click Start, Programs, Accessories and then Command Prompt.
2. In the Command Prompt window, type "ipconfig" and then press ENTER. The
window displays information about your IP address, subnet mask and default
gateway.
Advertisement
