Table of Contents
Advertisement
n 10/100BASE-TX Twisted-Pair Ports (Port1~24)
These ports support network speeds of either 10Mbps or 100Mbps,
and can operate in half- and full- duplex transfer modes. These ports
also support automatic MDI/MDI-X crossover detection, giving true
"plug and play" capability. Just plug the network cable directly into the
hub; you can use either straight-through or crossover cable.
n 1000BASE-T Twisted Pair Ports (Port 25~26)
The DES-1226G is equipped with two Gigabit twisted pair ports that
are auto negotiable 10/100/1000Mbps and also support auto
MDI/MDIX crossover detection. These two ports can operate in half-
and full- duplex modes.
n Mini GBIC Ports (Option Port 25~26)
The Switch is equipped with two mini-GBIC ports, supported optional
1000BASE-SX/LX mini-GBIC module.
Note: When the port was set to "Forced Mode", the Auto
MDI/MDIX will be disabled.
LED Indicators
LED stands for Light-Emitting Diode
The front panel LEDs provides instant status feedback and simplifies
monitoring and troubleshooting tasks.
LED indicators of the Switch
n
Power LEDs
On
When the Power LED light is on, the Switch is
receiving power.
Off
When the Power LED light is off, the power cord is
improperly connected.
.
4
Advertisement
Table of Contents
