Menu Descriptions & Functions; Source Menu (Source Icons) - NEC MultiSync LT 80 User Manual

Menu Descriptions & Functions
Source Menu
Enables you to select a video source such as a VCR, DVD player, laser disk player, compu-
ter or document camera depending on what is connected to your inputs. Press the "Select"
button on the projector cabinet or ( ) ( ) buttons on your remote control to highlight the
menu for the item you want to adjust
Video
Selects device connected to your video input (VCR, document camera, laser disk player or
DVD player).
S-Video
Selects device connected to S-Video input (Laser disk player, S-VHS VCR or DVD player).
RGB
Selects computer connected to your RGB input. Use the "Adjust" (+) or (–) buttons to
select a standard* or one of six** custom settings you can create and store. Press the "En-
ter" button on the cabinet or the "Left Click" button on the remote control to save your
selection.
NOTE: If a previously saved custom memory location is used with a new or different input signal
it may not sync up, producing a distorted image, or no image at all. If so, follow the instructions
below:
1) Disconnect the signal cable so that there is no input signal. In this condition the on-screen
2) Select RGB standard from the source menu.
3) Connect the signal cable again.
NOTE:
*
** "Custom 6" is read only. This feature is useful when an SVGA image (800 600) is displayed
message will be displayed.
Standard is normally used and it can be user changed and automatically recalled.
with a notebook computer supported by XGA (1024 768).
OPERATION
53
54