Connecting Your Remote Mouse Receiver - NEC MultiSync LT 80 User Manual

Connecting Your Remote Mouse Receiver

The remote mouse receiver enables you to operate your computer's
mouse functions from the NEC MultiSync LT80 remote control. It is a
great convenience for clicking through your computer-generated pre-
sentations.
To connect the remote mouse receiver:
1. Turn off your computer.
2. For PCs: Remove your current mouse and connect the serial cable
from the remote mouse receiver to your PC's mouse port. (Use the
6-pin adapter for connecting to a PS/2 computer.)
For Macintosh: Remove your current mouse from your computer,
attach the Macintosh adapter to the remote mouse receiver's serial
cable, and connect the receiver to your mouse port.
3. When the remote mouse receiver is installed, it will disable your
regular mouse, disconnect the remote mouse receiver and restart
your computer.
The Remote Mouse Receiver as a mouse for your computer
INSTALLATION
Serial cable (supplied)
47
IBM PC/AT
Macintosh
IBM PS/2
48