Sanitas SBM 52 Instructions For Use Manual page 16

Selecting memory
• Switch on the device with the Start/stop
When the device is switched off, the time and date are perma-
nently displayed.
• Select the desired user memory by pressing the function buttons
You have 4 memories, each with 30 memory spaces to store the
measurements of 4 different people separately.
Performing the blood pressure measurement
• As described before, attach the cuff and adopt the posture in
which you want to perform the measurement.
• Switch on the device with the Start/stop
• A display check is performed, during which all display segments light up.
• Start the device with the Start/stop
that will be used is displayed.
• The cuff is inflated to 180 mmHg. The cuff's air pressure is slowly
released. If a tendency for high blood pressure is already recog-
nised, the cuff is reinflated and the cuff's pressure is increased
again. As soon as a pulse is detected, the
Measuring can be cancelled at any time by pressing the Start/
stop button
• Systolic pressure, diastolic pressure and pulse measurements are
displayed.
Whilst the message is being displayed, the volume can be ad-
justed with the function buttons
• appears if the measurement could not be performed properly.
Observe the chapter on error messages/trouble-shooting in these
instructions for use and repeat the measurement.
• The measurement is automatically stored.
• The device switches off automatically after 1 minute.
Wait at least 5 minutes before performing another measurement!
button. The memory space
.
.
button.
.
button.
symbol flashes.
16
Voice output when voice function
is active
The device is ready for use.
You may start measuring.
User memory 1
User memory 2
User memory 3
User memory 4
Voice output when voice function
is active
The device is ready for use.
You may start measuring.
Systole ... mmHg
Diastole ... mmHg
Heart rate ... beats per minute
According to the WHO guide-
lines your blood pressure is
– optimal
– normal
– high to normal
– shows slight hypertension
– shows medium hypertension
– shows strong hypertension