Introduction To The Projector - NEC LT240 User Manual

INTRODUCTION

Introduction to the Projector

This section introduces you to your new LT260/LT240/LT220 Projector and
describes the features and controls.
Congratulations on Your Purchase of The LT260/LT240/
LT220 Projector
The LT260/LT240/LT220 is one of the very best projectors available today.
The LT260/LT240/LT220 enables you to project precise images up to 500
inches across (measured diagonally) from your PC or Macintosh com-
puter (desktop or notebook), VCR, DVD player, document camera, a laser
disc player or Viewer.
You can use the projector on a tabletop or cart, you can use the projector
to project images from behind the screen, and the projector can be per-
manently mounted on a ceiling*
Features you'll enjoy:
• The newly developed 3D Reform function allows you to correct trap-
ezoidal distortion for both horizontally and vertically so that the im-
age is square even when projector is positioned off center of the
rooms screen.
• The LT260/LT240/LT220 projector provides wired and wireless net-
working. When using as a wireless LAN projector, no physical signal
cable connection to a PC is required.*
1
* Do not attempt to mount the projector on a ceiling yourself.
The projector must be installed by qualified technicians in order to en-
sure proper operation and reduce the risk of bodily injury.
In addition, the ceiling must be strong enough to support the projector
and the installation must be in accordance with any local building codes.
Please consult your dealer for more information.
2
* A wireless LAN card is required. The NEC optional wireless LAN card is
available. (SWL-2100N-N )
1
. The remote control can be used wirelessly.
2
E-2