NEC LT240 User Manual page 110

USING ON-SCREEN MENU
Entry
To assign your passcode:
NOTE: Up to 15 digits can be assigned.
1. Select [Entry] and press the ENTER button. The [Entry] screen will be
displayed.
2. Type in a combination of SELECT buttons
TER button.
The [Confirm Passcode] screen will be displayed.
3. Type in the same combination of SELECT buttons
ENTER button.
Your passcode has been assigned.
Delete
To delete your passcode:
1. Select [Delete] and press the ENTER button. The [Delete] screen will be
displayed.
2. Type in your passcode and press the ENTER button.
Your passcode has been deleted.
In case you forget your passcode, follow the steps below to delete it.
1. Select the Advanced menu from the Basic/Custom menu. The Passcode
entry screen will be displayed.
2. Press the SELECT
button.
The "Warning Passcode!!" message will be displayed.
3. Press the SELECT
TER button.
The "Warning Passcode!!" message will be displayed.
4. Press the SELECT
TER button.
The "Delete Passcode / Are you sure?" message will be displayed.
Use the SELECT
button. Your passcode has been deleted.
Menu Descriptions & Functions
(up) button four times and then press the ENTER
(down) button four times and then press the EN-
(right) button four times and then press the EN-
or button to select "Yes" and press the ENTER
E-110
and press the EN-
and press the