NEC LT240 User Manual page 87

USING ON-SCREEN MENU
NOTE: During 3D Reform adjustment, "Aspect Ratio" may not be available.
Should this happen, first reset the 3D Reform data and then do setting again.
Second repeat the 3D Reform adjustment.
Changing the aspect ratio can limit 3D Reform in its adjustable range.
Input
Signal
Screen
Type
4:3 Screen
16:9 Screen
Masking Unwanted Area (Blanking)
This feature allows you to mask any unwanted area of the screen im-
age.
NOTE: Adjustment of vertical display range
Adjust the Top, Bottom, Left or Right blanking with the SELECT
Adjusting Position and Clock
This allows you to manually adjust the image horizontally and verti-
cally, and adjust Clock and Phase.
Horizontal/Vertical Position:
........................ Adjusts the image location horizontally and vertically
Menu Descriptions & Functions
4:3
4:3
4:3 Window 4:3 Fill
using the SELECT
is made automatically when the Auto Adjust is turned
on. See "Auto Adjust" on page E-98 for turning on or
off the Auto Adjust feature.
E-87
Letter Box
Letter Box
Wide Screen
Letter Box
and buttons. This adjustment
Squeeze
Crop
Wide Screen
or button.