NEC LT240 User Manual page 113

USING ON-SCREEN MENU
To turn on the projector when Security is enabled (when using your key-
word only)
1. Press and hold the POWER button for a minimum of two seconds.
The projector will be turned on and display a message to the effect that
the projector is security-protected.
2. Select [Projector Options]
TER button.
The Release Code input screen will be displayed.
3. Enter your keyword in the Release Code input screen.
You can view the projected image.
NOTE: Do not forget your keyword. However, if you forget your keyword, NEC or
your dealer will provide you with your Release Code. See more information at the
end of this section.
To turn on the projector when Security is enabled (when using a PC card
as a protect key)
1. Insert your registered PC card into the PC card slot.
2. Press and hold the POWER button for a minimum of two seconds.
The projector will turn on and then recognize the PC card. Once the im-
age has been projected, it will stay on without the PC card.
To delete PC card data you registered
1. Use the SELECT
button to select the list window.
2. Use the SELECT
lete.
3. Press the SELECT
button.
The PC card data will be deleted.
Menu Descriptions & Functions
[Security] from the menu and press the EN-
button to select "Register" and use the SELECT
button to select the PC card data you wish to de-
button to select "Delete" and press the ENTER
E-113