Connecting Your Dvd Player - NEC LT180 User Manual

Connecting Your DVD Player

Audio cable (not supplied)
Audio Equipment
AUDIO IN
L
You can connect your projector to a DVD player with component output or Video output. To do so, simply:
1. Turn off the power to your projector and DVD player.
2. If your DVD player has the component video (Y,Cb,Cr) output, use a component video cable (RCA
connect your DVD player to the COMPONENT IN connectors on the projector.
For a DVD player without component video (Y,Cb,Cr) output, use the S-Video cable to connect the S-Video
output of the DVD player to the S-VIDEO Input of the projector.
Use an audio cable to connect the audio from your DVD player to your audio equipment (if your DVD player
has this capability). Be careful to keep your right and left channel connections correct for stereo sound.
3. Turn on the projector and DVD player.
NOTE: Refer to your DVD player's owner's manual for more information about your DVD player's video output requirements.
AUDIO IN
PC CONTROL MONITOR OUT
R
Audio cable (not supplied)
2. INSTALLATION AND CONNECTIONS
COMPONENT IN
S-VIDEO IN
AUDIO OUT
Y Cb/Pb
L
COMPUTER IN
Cr/Pr
AUDIO IN COMPONENT IN VIDEO IN R AUDIO IN
AC IN
Component video RCA 3 cable
(not supplied)
DVD player
L R
AUDIO OUT COMPONENT OUT
E-17
Y Cb Cr
3) to