NEC LT180 User Manual page 15

Battery Installation
1
Press firmly and slide the battery cover off.
Remove both old batteries and install new ones
2
(AAA). Ensure that you have the batteries' polarity
(+/–) aligned correctly.
3
Slip the cover back over the batteries until it snaps
into place. Do not mix different types of batteries or
new and old batteries.
Remote Control Precautions
• Handle the remote control carefully.
• If the remote control gets wet, wipe it dry immediately.
• Avoid excessive heat and humidity.
• If you will not be using the remote control for a long time, remove the batteries.
• Do not place the batteries upside down.
• Do not use new and old batteries together, or use different types of batteries together.
• Dispose of used batteries according to your local regulations.
E-8
1. INTRODUCTION