NEC LT180 User Manual page 14

7. MENU Button
Displays the menu for various settings and adjustments.
8. SELECT Button
: Use these buttons to select the menu of the item you wish to adjust.
: Use these buttons to change the level of a selected menu item.
9. ENTER Button
Use this button to enter your menu selection. It works the same as the ENTER button on the cabinet. See
page E-4.
10. EXIT Button
It works the same as the EXIT button on the cabinet. See page E-4.
11. MOUSE L-CLICK Button
Not available on this model.
12. MOUSE R-CLICK Button
Not available on this model.
13. VIDEO Button
Press this button to select a video source connected to the VIDEO input.
14. S-VIDEO Button
Press this button to select an S-Video source connected to the S-VIDEO input.
15. COMPUTER Button
Press this button to select a video source from computer or component equipment connected to your COM-
PUTER IN port.
16. COMPONENT Button
Press this button to select a video source from component equipment connected to the COMPONENT input.
17. AUTO ADJ. Button
Use this button to adjust an RGB source for an optimal picture. See page E-26.
18. NOISE RED. Button
This button will turn on the noise reduction feature to reduce video noise.
19. VOLUME (+) (–) Button
Press (+) to increase the volume and (–) to decrease it.
20. ASPECT Button
Press this button once to display the Aspect Ratio select menu. Continue pressing to change aspect ratios.
See page E-36.
21. PICTURE Button
Press this button to display the Picture menu. Each time this button is pressed, the option will be changed.
See page E-34.
22. HELP Button
Provides the information about the status of the projector.
23. FREEZE Button
This button will freeze a picture. Press again to resume motion.
E-7
1. INTRODUCTION