Connecting Your Dvd Player - NEC VT45KG User Manual

Connecting Your DVD Player

DVD player
Y
L
R
Audio Equipment
R
You can connect your projector to a DVD player with component outputs or Video output. To do so, simply:
1. Turn off the power to your projector and DVD player.
2. If your DVD player has the component video (Y,Cb,Cr) output, use a commercially available component video cable (RCA 3)
and the optional 15-pin-to-RCA (female)
For a DVD player without component video (Y,Cb,Cr) outputs, use common RCA cables (not provided) to connect a composite
VIDEO output of the DVD player to the Video Input of the projector.
3. Turn on the projector and DVD player.
NOTE: Refer to your DVD player's owner's manual for more information about your DVD player's video output requirements,
Component video cable RCA 3
(not supplied)
C r
C b
Red
Blue
Green
White
L
White
Red
3 cable to connect your DVD player to the RGB INPUT connector on the projector.
Red
Blue
Red
Green
Blue
Green
Optional 15-pin-to-RCA (female)
(ADP-CV1)
Audio cable
(not supplied)
E–21
S - V
ID E
O
IN
A U
D IO
V ID
E O
L / M
IN
O N
IN
O
O U
T
R G
B O
R
IN U T
P C
IN
R G
B I
R G
B IN
N
3 cable