NEC LT180 User Manual page 30

3. PROJECTING AN IMAGE (BASIC OPERATION)
Move the projector left to center the image horizontally on the screen.
Using the Adjustable Rear Foot
The adjustable rear foot provides the projector with a horizontal tilt adjustment.
If the projector is placed on an uneven surface, keep the projector level by pushing down the left or right rear part
of the top cabinet with both hands.
NOTE: A spacer is attached to the adjustable rear foot to provide stability.
Remove the spacer before using the adjustable rear foot.
Save the spacer to use when replacing the lamp as it will keep the projector from tilting in the process (See page E-44).
Adjustable Rear Foot
CAUTION: Use care in handling the adjustable rear foot to avoid possible injury to fingers or hands. Using the
adjustable rear foot could pinch fingers or hands between the projector bottom and the adjustable rear foot.
E-23