Projector Information; Test Pattern - NEC GT6000 User Manual

Page 2
Signal Type, Video Type, Sync Type, Interlace, Direct Key

Projector Information

Displays the information for your projector such as lamp usage,
filter usage, version number and others. This dialog box has three
pages.
Page 1
Remaining Lamp 1 Time, Remaining Lamp 2 Time, Lamp 1 Hour
Meter, Lamp 2 Hour Meter
NOTE: The progress indicator shows the percentage of remaining bulb life.
The value informs you of the amount of lamp 1 and 2 respectively.
• When the remaining lamp time reaches 0, the Remaining Lamp Time bar indica-
tor changes from 0% to 100 hours and starts counting down. If the remaining
lamp time reaches 0 hour, the projector will not turn on.
Type
Normal
Standard lamp 2000H
Extended life lamp
NOTE: The Standard lamp life is typically 2000 hours in Normal mode (3000 hours
in Eco mode).
The lamp life, however, may be decreased under certain conditions and the lamp
could reach end of life within the specified time.
Lamp life (H)
Model
Eco
3000H GT60LP
4500H
GT60LPS
Page 2
Filter Usage, Projector Usage, Projector ID
Page 3
Version (BIOS/Firmware/Data/FPGA)

Test Pattern

Press to display the test pattern. Pressing this button sequen-
tially selects 10 test patterns for each red, green and blue.
8-29
8. Using On-Screen Menu