Using The Usb Mouse; Using The Usb Hub Function - NEC GT6000 User Manual

v Using the USB Mouse
Using a commercially available USB mouse gives you smooth operation.
USB
DVI
AUDIO
AUDIO OUT RGB 1
OPTION 1 OPTION 2
L/MONO L/MONO
R AUDIO R
RGB 2
R/Cr
G/Y
RGB OUT
B/Cb
VIDEO S-VIDEO
H/HV
V
L/MONO L/MONO
R R
NOTE: There may be some brands of USB mouse that the projector does not sup-
port.
Operate the Projector Menus using the USB mouse
Mouse Cursor
When connecting a USB mouse to the projector, you get a
mouse cursor on the screen.
Unless you use your USB mouse within 10 seconds, the mouse
cursor disappears.
Menu Display
Clicking with a mouse button displays the menu.
Clicking displays the pull-down menu. To close the menu,
click anywhere in the background.
Adjusting and Setting Display
You can select a menu item and click with a mouse button to
make adjustments and settings.
Examples
Click (or press and hold) the mouse button
the brightness. Or click and drag the mouse button on the slide
bar horizontally to adjust it.
To save the adjustments, click
click anywhere in the background while displaying an adjust-
ment and setting menu or dialog box, you will go to the main
menu after clicking with the mouse.
Clicking displays help.
Using the Middle Button/Wheel on a Mouse (when avail-
able)
The projector supports the middle button/wheel on a mouse. With
the middle button/wheel you can use a scroll bar or click the middle
button/wheel to display or hide the Chalkboard toolbar.
( )
MOUSE/HUB
2
USB MOUSE/HUB ( ) USB ( PC ) PC CARD 1
LAN
PC CONTROL
IN
REMOTE 1
OUT
SC TRIGGER REMOTE 2
IN OUT
AC IN
or
. This closes the menu. If you
Operate the PC mouse using the USB mouse
AUDIO OUT RGB 1
L/MONO L/MONO
R R
AUDIO
RGB 2
R/Cr
G/Y
RGB OUT
B/Cb
VIDEO S-VIDEO
H/HV
V
L/MONO L/MONO
R R
NOTE: You can select the operation mode of the USB mouse connected to the USB
port of the projector.
b Using the USB HUB Function
When using the projector with a PC via the supplied USB cable, both the
USB port(type A) on the projector can be connected to a USB-supported
scanner or other USB-supported device. (USB Hub Function)
Example: When connecting a PC and a scanner to each USB port respec-
tively
to adjust
An example of how a scanned image is projected
1. Install the Dynamic Image Utility on your PC.
NOTE: The Dynamic Image Utility is contained on the supplied CD-ROM. See
"6- b Software Installation" for the installation procedure.
2. Use your scanner to scan an image.
NOTE: A scanner driver must be installed on your PC before use.
3. Load the scanned image on your PC using the Dynamic Image Utility.
4. Transmit the scanned image from your PC to the projector via the USB
cable and project the image on the screen.
NOTE:
• The USB HUB function is effective only when "Auto" is selected in Operation
Mode Select.
• The PCs using the USB Host Controller may not be available.
• When connecting a USB hub to the USB port (type B) on the projector, be sure
to use a USB hub capable of supplying 500mA per port of downstream current.
4-3
4. Convenient Features
DVI
AUDIO
OPTION 1 OPTION 2
(
USB MOUSE/HUB
USB ( MOUSE/HUB )
AUDIO DVI
AUDIO OUT RGB 1
OPTION 1 OPTION 2
USB MOUSE/HUB ( ) USB ( PC ) PC CARD
L/MONO L/MONO
PC CONTROL
R AUDIO R
RGB 2
R/Cr
IN
G/Y
RGB OUT
OUT
B/Cb
VIDEO S-VIDEO SC TRIGGER
H/HV
V
L/MONO L/MONO
R R
( )
USB PC
2
) ( ) 1
USB PC PC CARD
LAN
PC CONTROL
IN
REMOTE 1
OUT
SC TRIGGER REMOTE 2
IN OUT
AC IN
USB ( PC )
2
1
LAN
REMOTE 1
REMOTE 2
IN OUT
AC IN