Lens Memory - NEC GT6000 User Manual

, Lens Memory

This function serves to store the adjusted value when using the Shift, Focus, and
Zoom buttons of the projector or the remote control.
Reference memory:
Reference Point ....... Adjusted settings are stored in memory as a reference com-
mon to all the input sources. If no setting is stored in Cus-
tom Point, the adjusted settings in Reference Point will be
applied.
Custom memory:
Custom Point ........... Adjusted settings are stored in memory for each input sig-
nal.
Usage Example
When you wish to display on a screen having a 4:3 aspect ratio an NTSC or other
4:3 aspect ratio signal and an SXGA or other 5:4 aspect ratio signal:
Perform shift, focus, and zoom adjustments to set the vertical screen size of the
vertically tall 5:4 aspect ratio signal to standard.
Both 4:3 apsect ratio signals and 5:4 aspect ratio signals can now be displayed.
Note that with these shift, focus, and zoom adjustments, the 4:3 aspect ratio signal
will become smaller on the screen.
To eliminate this size reduction, adjust the shift, focus and zoom to the optimum
condition for each of the 4:3 aspect ratio signal and the 5:4 aspect ratio signal.
Memory (storage) of each of these values will permit projection at an optimum con-
dition upon signal switching.
1. Perform Zoom, Focus and Lens Shift adjustments and store them in memory
using "Set Custom Point".
Another way to store your adjustments is to use the CTL and INFO buttons on
the remote control.
2. When "Yes" is selected for "Use Point on Signal Change", the adjustment is ap-
plied to the signal you switched.
3. Select "OK" and press the ENTER button for the change to take effect.
NOTE: The Lens Memory function is not available in Link mode.
NOTE:
* Settings for zoom and focus cannot be stored for the GT13ZL, GT24ZL and GT34ZL lens; settings for lens
shift, zoom and focus can be stored for the GT12ZLB, GT13ZLB, GT19ZLB, GT20ZL, GT34ZLB and GT48ZLB
lens.
* The Lens Memory function is not available for the GT06RLB and GT10RLB lens.
Picture Mute during Lens Shift?
To turn off the image and sound during lens shift, select "Yes".
NOTE: This option is only available when "Yes" is selected for "Use Point on Signal Change?".
4-5
4. Convenient Features