Repeater Support; Protecting Against Unauthorised Access; Resetting The Base To The Default Settings - Gigaset E310 Manual

Setting the base

Repeater support

You can increase the range and sig-
nal strength of the base using a
repeater. You will need to activate
repeater mode. This will terminate
any calls that are in progress at the
time.
¤ q Settings ¤
§Menu§
¤ q System ¤
¤ q Repeater Mode
¤
§OK§
(‰ = activated)
After activating or deactivating the
repeater, switch your handset off
and on again (¢ page 20).
Please note
u Eco Mode / Eco Mode+
(¢ page 41) and repeater sup-
port cancel each other out, i.e.,
if you use a repeater, you can-
not use Eco Mode or Eco
Mode+.
u The default encrypted trans-
mission setting is deactivated
when repeater mode is acti-
vated.
Protecting against
unauthorised access
Protect the system settings of the
base with a system PIN known only
to you. You will need to enter the
system PIN when, for example, regis-
tering/de-registering a handset to/
from the base.
50
§OK§
§OK§
Changing the system PIN
You can change the base's 4-digit
default system PIN ("0000") to a 4-
digit PIN known only to yourself.
Gigaset E310A: Setting a system PIN
enables remote operation of the
answering machine (¢ page 39).
¤ q Settings ¤
§Menu§
¤ q System ¤
¤ q System PIN ¤
¤ System PIN:
~ (Enter current system PIN) ¤
¤ New PIN:
~ (Enter new system PIN) ¤
Resetting the system PIN
If you have forgotten your system
PIN, you can reset the PIN to the
original code 0000 using the but-
ton on the base. This will also reset
other settings; see the section enti-
tled "Resetting the base to the
default settings".
Resetting the base to the
default settings
When restoring default settings:
u Individual settings are reset
u All lists are deleted
u Eco Mode and Eco Mode+ are
deactivated
The date and time are retained.
Please note
The answering machine is ready
for use approx. 15 seconds after
the base has been connected or
reset.
§OK§
§OK§
§OK§
§OK§
§OK§