Making calls
Making calls
When the display backlight is
switched off, pressing any key will
activate the backlight. The relevant
key function is performed.
Making external calls and
ending calls
External calls are calls using the pub-
lic telephone network.
Enter the phone number ~ and
press the talk key c. The number is
dialled.
You can also first press and hold the
talk key c (dial tone) and then
enter the number.
Press and hold the hash key # to
enter a dialling pause.
During the call, you can access the
menu for adjusting the earpiece vol-
ume with t and adjust the volume
using q.
Ending a call/cancelling dialling:
Press the end call key a or place
the handset in the base or charger.
Accepting a call
The handset indicates an incoming
call in three ways: by ringing, by a
display on the screen and by the
flashing talk/speaker key d.
Press the talk/speaker key c to
accept the call.
If the handset is in the base and the
Auto Answer function is activated
(¢ page 46), the handset will accept
26
a call automatically when you lift it
out of the base.
If the ringer is intrusive, press
¤ Silent ¤
§Menu§
You can accept the call as long as it is
displayed on the screen.
Calling Line Identification
When you receive a call, the caller's
number is displayed on the screen if
the following prerequisites are met:
u Your network provider supports
CLIP, CLI
– CLI (Calling Line Identification):
the caller's number is
transmitted.
– CLIP (Calling Line Identification
Presentation): the caller's
number is displayed.
u You have requested CLIP from
your network provider.
u The caller has requested CLI from
the network provider.
Call display
When you receive a call, the phone
number is shown in the display.
If the number of the caller is stored
in your directory, the display is
replaced by the corresponding
directory entry.
123456789
Menu
The following is displayed instead of
the number:
§OK§