Network Menu; Consumables Menu - MINOLTA-QMS magicolor 2300 DL User Manual

Nec printer user manual
Hide thumbs Also See for magicolor 2300 DL:
Table of Contents

Advertisement

Network Menu

If the printer is connected to a network, the following settings should be
specified. For details about each setting, contact your network administrator.
IP Address
Subnet Mask
Gateway
HW Address
DHCP*
BOOTP*
HTTP*
SNMP*
Notes

Consumables Menu

Black Toner
Yellow Toner
Magenta
Toner
Cyan Toner
Drum Unit
36
Set the IP address of this printer on the network. Use the
Up, Down, Left, and Right keys to enter the value.
When manually setting the IP address, turn off DHCP and
BOOTP first.
Set the subnet mask value of the network. Use the Up,
Down, Left, and Right keys to enter the value.
If a router is used on the network, enter the IP address of
the router. Use the Up, Down, Left, and Right keys to enter
the value.
The Ethernet hardware address for this printer can be
displayed. (It cannot be changed.)
If there is a DHCP server on the network, specify whether
the IP address is automatically assigned by the DHCP
server and other network information is loaded (can be set
to On or Off).
Specify whether the IP address is automatically assigned
by BOOTP and other network information is loaded (can be
set to On or Off).
HTTP can be set to On or Off. On enables the Internal Web
Page inside the printer, Off disables it.
SNMP is a scalable, distributed management suite for
managing small to large size networks. SNMP can be set to
On or Off.
*You must turn the printer off and then on again before
these settings take effect.
The amount of toner remaining in the black toner cartridge.
The amount of toner remaining in the yellow toner
cartridge.
The amount of toner remaining in the magenta toner
cartridge.
The amount of toner remaining in the cyan toner cartridge.
The remaining service life for the OPC drum cartridge.
Selecting a Message Window Language

Advertisement

Table of Contents
loading

Table of Contents