Thick Stock - MINOLTA-QMS magicolor 2300 DL User Manual

!
Cold-water-transfer paper
!
Pressure sensitive
!
Designed specifically for inkjet printers (superfine paper, glossy paper,
glossy film, postcards, etc.)
!
Already been printed on by another printer, copier, or fax machine
!
Dusty
!
Wet (or damp)
" #
!
Layered
!
Adhesive
!
Folded, creased, curled, embossed, warped, or wrinkled
!
Perforated, three-hole punched, or torn
!
Too slick, too coarse, too textured
!
Different in texture (roughness) on the front and back
!
Too thin or too thick
!
Stuck together with static electricity
!
Composed of foil or gilt; too luminous
!
Heat sensitive or cannot withstand the fusing temperature (356° F/180° C)
!
Irregularly shaped (not rectangular or not cut at right angles)
!
Attached with glue, tape, paper clips, staples, ribbons, hooks, or buttons
!
Acidic
!
Any other media that is not approved

Thick Stock

Paper thicker than 24 lb (90 g/m
thick stock to ensure acceptable performance and to ensure that the image
does not shift.
Capacity
Orientation Face up
Type
Media Types
Keep media between 35% to 85% relative humidity. Toner does
not adhere well to moist or wet paper .
Tray 1 Up to 50 thick stock sheets, depending on their
thickness. Thick stock is supported only in letter,
A4, or smaller media sizes.
Tray 2 Not supported
Check www.minolta-qms.com/support (click on Answer Base)
for currently approved media. To order approved media, go to
www.q-shop.com.
2
) bond is referred to as thick stock. Test all
13