External Monitor - NEC Versa Series User Manual

External Monitor

You can add a standard external monitor to your NEC Versa DayLite/UltraLite system
using a display signal cable (usually provided with the monitor) and a monitor transfer
cable.
Follow these steps to connect an external monitor to your NEC Versa notebook.
Check that power to both the NEC Versa notebook and the monitor is off.
1.
Open the monitor port cover on the left side of the system.
2.
Attach the monitor transfer cable connector to the monitor port on the system.
3.
Connect the monitor cable to the transfer cable.
4.
Connect the monitor power cable and plug it into a properly grounded wall outlet.
5.
Follow any setup instructions in the monitor's user's guide.
6.
Turn on power to the system and the monitor.
7.
Press
8.
8-2 Using External Devices
Connecting a monitor
to toggle through the video modes: LCD, CRT, or both.
Fn-F3