Remove the screw and lift off the memory module bay cover. See "Identifying the
3.
Switch Settings" for information about each setting.
Reassemble the NEC Versa components as follows.
4.
!
!
!
Identifying the Switch Settings
The following list identifies each switch setting and its function.
Switch 1 — Password override — The default setting is "OFF." If you forget your
!
password and cannot access the data on your NEC Versa, change the setting to
"ON" and your current password is erased.
Switch 2 — Keyboard select; Default is "ON" for U.S. 86 key keyboard and "OFF"
!
for European keyboard.
Switch 3 — Not assigned; must be "OFF."
!
Switch 4 — Keyboard select 2; Default is "ON" for US and "OFF" for European
!
keyboards.
Switch 5 — Reserved for factory use; Default is "ON."
!
Switch 6 — Logo select; Default is "OFF."
!
3-20 Using the BIOS Setup Utility
Replace the memory module bay cover.
Replace the screw.
Turn the system over.
Default switch settings