NEC Versa Series User Manual page 43

system to malfunction.
Menu Item
BootUp Num-Lock
PS/2 Mouse
LCD Panel View Expansion
BootUp Message
Summary Screen
Silent Boot
I/O Device Configuration
On Board Device Configuration
USB Device
Setting items on this menu to incorrect values can cause your
Advanced Menu
Settings (default is bold)
LockOn, LockOff
Selects the state for Num Lock at power on.
Enabled, Disabled
Enabled forces the PS/2 mouse port to be
enabled regardless of whether a mouse is
present. Disabled prevents any installed
PS/2 mouse from functioning, but frees up
IRQ 12.
Enabled, Disabled
Disabled reduces the panel view in some
video modes. Enabled expands the panel
view. The enabled setting sometimes affects
graphic quality.
Enabled, Disabled
Disabled suppresses the logo screen during
boot.
Disabled, Enabled.
When set to Enabled, information about the
system's configuration is displayed onscreen
during boot.
Disabled, Enabled, Black.
When set to Enabled, the logo screen
appears during boot. Disabled causes the
POST messages to appear during boot.
Black causes the screen to remain black
during boot.
Press Enter to bring up the I/O Device
Configuration submenu to configure the IR
serial port.
Press Enter to view submenu.
Enable, Disable
Using the BIOS Setup Utility 3-9