Installation; Ventilation Requirements For Enclosure Mounting - NEC PX-42XM4A User Manual

Nec solutions plasmasync 42xm4 50xm5 61xm4 plasma monitor models px-42xm4a, px-50xm5a, px-61xm4a user's manual
Hide thumbs Also See for PX-42XM4A:
Table of Contents

Advertisement

Available languages

Available languages

Installation

You can attach your optional mounts or stand to the plasma monitor in one of the following two ways:
* While it is upright. (See Drawing A)
* As it is laid down with the screen face down (See Drawing B). Lay the protective sheet, which was wrapped around the
monitor when it was packaged, beneath the screen surface so as not to scratch the screen face.
* Do not touch or hold the screen face when carrying the unit.
• This device cannot be installed on its own. Be sure to use a stand or original mounting unit. (Wall
mount unit, Stand, etc.)
• For correct installation and mounting it is strongly recommended to use a trained, authorized
dealer.
Failure to follow correct mounting procedures could result in damage to the equipment or injury
to the installer.
Product warranty does not cover damage caused by improper installation.
* Use only a mounting kit or stand recommended by the manufacturer and listed as an accessory.
Drawing A
Ventilation Requirements for
enclosure mounting
To allow heat to disperse, leave space between surrounding
objects as shown on the diagram when installing.
Drawing B
50
(2")
mm
En-5
Wall
50
(2")
mm
Wall
50
(2")
mm

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents