Download  Print this page

NEC PX-42XM4A User Manual page 4

Nec solutions plasmasync 42xm4 50xm5 61xm4 plasma monitor models px-42xm4a, px-50xm5a, px-61xm4a user's manual
Hide thumbs

Advertisement

Table of Contents
Warning
Not for use in a computer room as defined in the
Standard for the Protection of Electronic Computer/
Data Processing Equipment ANSI/NFPA 75.
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there
is no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment
off and on, the user is encouraged to try to correct
the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
receiver.
• Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
• Consult the dealer or an experienced radio / TV
technician for help.
This Class B digital apparatus complies with
Canadian ICES-003.
NOTE:
When you connect a computer to this monitor, use an RGB
cable including the ferrite core on both ends of the cable.
And regarding power cable, attach the supplied ferrite
cores. If you do not do this, this monitor will not conform
to mandatory FCC standards.
Set the ferrite cores on both ends of the power cable
(supplied).
Use the band to fasten the ferrite core (supplied) to the
power cable.
Power cable (supplied)
band
core
Caution
This model is for use with the following optional
accessories. Use with other optional accessories is
capable of resulting in instability causing possible
injury.
42 inch
Manufacturer's name: NEC Viewtechnology, Ltd.
Speakers: PX-42SP1U, PX-SP2U/S, PX-SP2U/B
Stand: PX-ST1U, PX-ST1U/S
50 inch
Manufacturer's name: NEC Viewtechnology, Ltd.
Speakers: PX-50SP1U, PX-50SP1U/S
Stand: PX-ST1U, PX-ST1U/S
61 inch
Manufacturer's name: NEC Viewtechnology, Ltd.
Speakers: PX-61SP1U, PX-61SP1U/S
Stand: PX-61ST1U, PX-61ST1U/S
Please contact NEC Solutions (America), Inc. for
approved optional accessories.
each Member State requires that used electrical
and electronic products carrying the mark (left)
must be disposed of separately from normal
household waste. This includes plasma monitors
and their electrical accessories. When you dispose
of such products, please follow the guidance of
your local authority and/or ask the shop where you
purchased the product.
After collecting the used products, they are reused
and recycled in a proper way. This effort will help
us reduce the wastes as well as the negative
impact to the human health and the environment
at the minimum level.
The mark on the electrical and electronic products
only applies to the current European Union
band
Member States.
core
When disposing of used batteries, please comply
with governmental regulations or environmental
public instruction's rules that apply in your country/
area.
En-3
PX-SP2U/S, PX-SP2U/B
PX-SP2U/S, PX-SP2U/B
Disposing of your used
product
EU-wide legislation as implemented in
CAUTION

Advertisement

Table of Contents
loading

  Related Manuals for NEC PX-42XM4A