Fuse Replacement - Mercury 150 Manual

Disengagement of a steering link rod can result in the boat taking a full, sudden, sharp turn. This
potentially violent action can cause occupants to be thrown overboard exposing them to serious injury
or death.
d
a - Special washer head bolt (10-849838)
b - Flat washer (2)
Description
Special washer head bolt
Nylon insert locknut "d"
Nylon insert locknut "c"
Assemble steering link rod to steering cable with two flat washers and self-locking nylon insert locknut.
Tighten locknut until it seats, then back nut off 1/4 turn.
Assemble steering link rod to engine with special washer head bolt and self-locking nylon insert locknut.
First torque bolt, then torque locknut to specifications.

Fuse Replacement

IMPORTANT: Always carry spare 5 and 20 AMP fuses.
The electrical wiring circuits on the outboard are protected from overload by fuses in the wiring. If a fuse
is blown, try to locate and correct the cause of the overload. If the cause is not found, the fuse may blow
again.
MAINTENANCE
WARNING
!
a
Nm
27
27
Tighten until seats, then back off 1/4 turn
37
c - Nylon insert locknut (11-826709113)
d - Nylon insert locknut (11-826709113)
lb. in.
b
c
ob00676
lb. ft.
20
20