Husqvarna TR 36 Operator's Manual page 8

Hide thumbs Also See for TR 36:
Table of Contents

Advertisement

Available languages

Available languages

SAFETY INSTRUCTIONS
DO move the machine at least 10 feet (3 meters) from the fueling point before starting the engine and make
sure the fuel cap is on the machine and properly tightened.
DO lift machine only from specified lifting point.
DO clean the machine after each day's use.
DO use caution when handling fuel.
WARNING: Failure to comply with the following warnings could result in serious
bodily injury or death!
DO NOT
DO NOT operate this machine unless you have read and understood this operator's manual.
DO NOT operate this machine without the blade guard, or other protective guards in place.
DO NOT stand on the guard ring.
DO NOT leave this machine unattended while the engine is running.
DO NOT work on this machine while the engine is running.
DO NOT operate this machine when you are tired or fatigued.
DO NOT operate this machine while under the influence of drugs or alcohol.
DO NOT operate the machine if you are uncertain of how to run the machine.
DO NOT use damaged equipment or blades.
DO NOT touch or try to stop the spinning blades with your hand or foot.
DO NOT use a blade that has been dropped or damaged.
DO NOT touch a blade immediately after use. Blades require several minutes to cool.
DO NOT use damaged or worn blade flanges.
DO NOT allow other persons to be near the machine when starting, refueling, or when the machine is in
operation.
DO NOT operate this machine in an enclosed area. Breathing Poison Exhaust Gas could result in death.
DO NOT operate this machine in the vicinity of anything that is flammable. Sparks could cause a fire or an
explosion.
DO NOT operate this machine with the belt guards or guard ring removed.
DO NOT operate this machine unless you are specifically trained for its operation.
DO NOT modify this trowel or use it for any application other than for which it was designed.
8

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tr 48

Table of Contents