Domain Name; Alert Mail - NEC MultiSync X461UN User Manual

Alert Mail Setting
http://<the Monitor's IP address>/lanconfig.html
This option notifies your computer of an error message via e-mail when using wired LAN. An error message notification will be
sent when an error occurs in the monitor.
HOST NAME

DOMAIN NAME

ALERT MAIL

SENDER'S ADDRESS
SMTP SERVER NAME
RECIPIENT'S
ADDRESS 1 to 3
APPLY
EXECUTE
STATUS
NOTE: • If you execute a test, you may not receive an Alert mail.
Should this happen, check if the network settings are correct.
• If you entered an incorrect address in a test, you may not receive an Alert mail.
Should this happen, check if the Recipient's Address is correct.
TIP: The Alert Mail settings will not be affected even when [RESET] is done from the menu.
Type in the hostname of the network connected to the monitor.
Up to 60 alphanumeric characters can be used.
Type in the domain name of the network connected to the monitor.
Up to 60 alphanumeric characters can be used.
Checking [ENABLE] will turn on the Alert Mail feature.
Checking [DISABLE] will turn off the Alert Mail feature.
Type in the senders address. Up to 60 alphanumeric and symbols characters can be used.
Type in the SMTP server name to be connected to the monitor.
Up to 60 alphanumeric characters can be used.
Type in your recipient's address. Up to 60 alphanumeric and symbols characters can be used.
Click this button to reflect the above settings.
Click this button to send a test mail to check if your settings are correct.
A reply to a test mail will be displayed.
English-32