Connecting A Personal Computer; Connecting A Dvd Player With Hdmi Out - NEC MultiSync X461UN User Manual

Connecting a Personal Computer

Connecting your computer to your LCD monitor will enable you to display your computer's screen image.
Some video cards and a pixel clock over 162MHz may not display an image correctly.
Your LCD monitor displays proper image by adjusting the factory preset timing signal automatically.
<Factory preset signal timing>
Scanning frequency
Resolution
Horizontal
640 x 480 31.5kHz
800 x 600 37.9kHz
1024 x 768 48.4kHz
1280 x 768 48kHz
1360 x 768 48kHz
1280 x 1024 64kHz
1600 x 1200 75kHz
1920 x 1080 66.6kHz
• If you use with a Macintosh PowerBook, set "Mirroring" to Off.
Refer to your Macintosh's owner's manual for more information about your computer's video output requirements and any
special identification or configuring your monitor's image and monitor may require.
• Input TMDS signals conforming to DVI standards.
• To maintain display quality, use a cable that conforms to DVI standards.

Connecting a DVD Player with HDMI out

• Please use an HDMI cable with HDMI logo.
• It may take a moment for the signal to appear.
• PC-DVI signals are not supported.
Remarks
Vertical
60Hz
60Hz
60Hz
60Hz
60Hz Recommended resolution
60Hz Compressed image
60Hz Compressed image
60Hz Compressed image
English-15