Download  Print this page

Controlling The Lcd Monitor Via Rs-232C Remote Control - NEC MultiSync X461UN User Manual

Nec electronics america flat panel television user's manual
Hide thumbs

Advertisement

Controlling the LCD monitor via RS-232C Remote Control

This LCD monitor can be controlled by connecting a personal computer with a RS-232C terminal.
NOTE: When you use this function, EXTERNAL CONTROL should be "RS-232C".
Functions that can be controlled by a personal computer are:
Power ON or OFF
Switching between input signals
Connection
LCD Monitor + PC
PC
IN
OUT
(Out)
RS-232C Cable
NOTE: If your PC (IBM or IBM compatible) is equipped only with a 25-pin serial port connector, a 25-pin serial port adapter is
required. Contact your dealer for details.
* In order to function, the RS-232C OUT terminal can only be connected to another monitor of the same model.
Do not connect to other types of equipment.
To control monitor or multiple monitors that are daisy-chained together please use the control command. Instructions for the
control command can be found on the CD included with the display. The file is called "External_control.pdf".
1) Interface
PROTOCOL
RS-232C
BAUD RATE
9600 [bps]
DATA LENGTH
8 [bits]
PARITY BIT
NONE
STOP BIT
1 [bit]
FLOW CONTROL
NONE
This LCD monitor uses RXD, TXD and GND lines for RS-232C control.
2) Control command diagram
Please see file "External_Control.pdf" on the CD-ROM.
MultiSync
RS-232C (IN)
RS-232C (OUT)
English-29
MultiSync
RS-232C (IN)
RS-232C Cable
RS-232C (OUT)
MultiSync

Advertisement

loading

  Related Manuals for NEC MultiSync X461UN

This manual is also suitable for:

X461un-tmx4