Picture Mode - NEC MultiSync X461UN User Manual

Picture Mode

DVI, VGA, RGB/HV
STANDARD sRGB
HDMI, DVD/HD1, DVD/HD2, SCART, VIDEO1, VIDEO2, S-VIDEO, TV*
STANDARD CINEMA
AMBIENT Mode
The brightness of the LCD screen can be set to increase or decrease depending on the amount of ambient light within the
room. If the room is bright, the monitor becomes correspondingly bright. If the room is dim, then the monitor will dim
accordingly. The purpose of this function is to make the viewing experience more comfortable to the eye in a variety of lighting
conditions.
NOTE: When picture mode is set to AMBIENT1 or AMBIENT2, AUTO BRIGHTNESS function is disabled.
Do not cover anbibrint sensor when you use AMBIENT1 or AMBIENT2 in PICTURE MODE.
AMBIENT parameter setting
PICTURE MODE in OSD, select AMBIENT1 or AMBIENT2 and set IN BRIGHT and IN DARK.
IN BRIGHT: This is the brightness level that the monitor will go up to when the ambient light level is highest.
IN DARK: This is the level of brightness that the monitor will go down to when the ambient light level is low.
When the AMBIENT function is enabled the Brightness level of the screen changes automatically according to the lighting
conditions of the room (Figure 1).
BRIGHTNESS level set
for the monitor to use
when ambient lighting
level is low.
IN DARK:
IN BRIGHT: BRIGHTNESS level set for the monitor to use when ambient lighting level is low.
AMBIENT1 AMBIENT2
AMBIENT1 AMBIENT2
IN DARK
dark
BRIGHTNESS level set for the monitor to use when ambient lighting level is high.
HIGHBRIGHT
HIGHBRIGHT
IN BRIGHT
room bright condition
Screen Brightness value by AMBIENT mode
Figure 1
English-18
BRIGHTNESS range
BRIGHTNESS level set for the
monitor to use when ambient
lighting level is high.
bright