KEEP PIP MODE
SIDE BY SIDE (ASPECT) SIDE BY SIDE ASPECT
SIDE BY SIDE (FULL)
OSD TURN OFF
MONITOR INFORMATION Monitor Information.
Resets the following settings within the SCHEDULE menu back to factory setting:
OFF TIMER, SCHEDULE SETTINGS.
Allows the monitor to remain in "PIP" and "TEXT TICKER" mode after powering off.
When Power is returned, PIP and TEXT TICKER appear without having to enter the OSD.
SIDE BY SIDE FULL
Selects the size of the sub-picture used in Picture-in-Picture (PIP) mode.
Determines where the PIP appears on the screen.
Selects sub picture aspect, [FULL], [NORMAL], [WIDE] and [ZOOM]. See page 17.
Allow text insertion within main screen with the ability to adjust for direction, position, size,
blend for transparency rate, detect and fade in. The TEXT TICKER and PIP functions cannot be
used simultaneouslly. If the PIP function is on, it will be deactivated and vice versa if the
TEXT TICKER is turned on.
Selects sub picture input signal.
Resets PIP options back to factory settings except ASPECT and SUB INPUT.
Select the language used by the OSD.
Turns off the OSD after a period of inactivity. The preset choices are 10-240 seconds.
Determines the location where the OSD appears on the screen.
Selects whether the information OSD is displayed or not. The information OSD will be
displayed when the input signal or source changes. The information OSD will also give a
warning when there is no-signal or the signal is out-of range.
An interval between 3 to 10 seconds for the Information OSD to appear is available.
CARBON SAVINGS: Display the estimated carbon saving information in kg. The carbon
footprint factor in the carbon saving calculation is based on the OECD (2008 Edition).
X = 95, Y = 92
Depend on signal input
X = 128, Y = 225
ON, 3 Sec.