Alarm; Camera Control; Add (Pair) A Camera; View A Camera - Motorola MBP43 User Manual

4.5

Alarm

M
1. Press the Menu button and the menu bar will pop up.
<
2. Press the LEFT button or
+
3. Press the UP button or
2h
). (The default setting is Alarm
If an alarm is set, the parent unit will beep for about 45 seconds after every
6, 4 or 2 hour period, and the alarm icon will flash red.
4.6

Camera Control

4.6.1

Add (pair) a camera

M
1. Press the Menu button and the menu bar will pop up.
<
2. Press the LEFT button or
+
the / /
+
3. Press the UP button or
button to confirm.
C C C
4. 1 / 2 /
button to select the desired CAM, and press the OK button to start
searching for a camera unit. The green audio level LED will flash rapidly
while searching.
5. Press and hold the PAIR button under the baby unit until the parent unit
finds the camera, beeps and the camera picture appears.
NOTE
A camera can only be registered to one parent unit at a time.
4.6.2

View a camera

M
1. Press the Menu button and the menu bar will pop up.
<
2. Press the LEFT button or
+
/ / /
+
3. Press the UP button or
button to confirm.
C C C
4. 1 / 2 /
button to select desired CAM, and press the OK button to view the picture
from that camera.
TIP
Press OK repeatedly for a quick way to View cameras without the menu.
Parent Unit Menu Options
>
RIGHT button until
-
DOWN button to select the alarm time (
>
RIGHT button until
/ menu will pop up.
-
DOWN button to select
C
3 / 4 will pop up, press the
>
RIGHT button until
menu pops up.
-
DOWN button to select
C
3 / 4 will pop up, press the
A
.)
C
+
+
UP button or
C
is highlighted and the
+
UP button or
is highlighted.
6h 4h
,
is highlighted, and
, and press the OK
-
DOWN
, and press the OK
-
DOWN
,
15